Although it is true that custom made arch support insoles for those who have flat feet must be made by a licensed professional, it is actually possible to make handmade orthotics at home. However, these types should only be made for those whose flat foot condition is not too severe. Basically, the homemade ones can be made for those who have low arches in order to stay safe.
Now before one would want to make one of these things, he would first have to get hand of certain materials. Now the most important thing that he would need would be some insoles probably from other shoes that he does not use anymore. Just make sure that all sizes of these things are more or less the same or similar.
Once these soles have already been gotten, then the very next thing to do would be to get some glue. One is recommended to use super glue for this kind of project because super glue is very efficient and dries fast. However, if one does not have super glue in his house, then he may use some other sticky glue that is waterproof.
So after getting the old insoles, one has to now do a bit of measurements. Always do make sure that all insoles have the same size so that it will be easier to place them on each other. So when one puts one insole on top of the other, he has to find the part that holds the arch of the foot.
After determining the part that would hold the arch, then he now has to cut that part with the sharp scissors. Now he has to make sure that the part that was cut out is really able to fit the insole that is whole otherwise one would have to cut it a little bit more. Once he has already done that, then the next part would be to now glue that small part to the whole insole.
After that, one may now leave the glue to dry before he tries to put it into his shoe and start walking. If he wants the glue to dry extremely fast, then he may use an electric fan to be able to help him. For fast drying purposes, one is recommended to use super fast drying glue that really sticks.
In the event that the arch support is still not high enough for the person making it, then he may actually put another insole if he would want. He just has to get the third insole and just do the entire process again. Once he has done that, then he just has to wait for the glue dry and then try it on again.
Now making handmade orthotics at home as quite easy as one will be able to see. However, do not try to do this if the flat feet case is quite severe. These handmade ones should only be used for those whose cases are not severe as the severe cases would already need the custom made ones with specific measurements.
Now before one would want to make one of these things, he would first have to get hand of certain materials. Now the most important thing that he would need would be some insoles probably from other shoes that he does not use anymore. Just make sure that all sizes of these things are more or less the same or similar.
Once these soles have already been gotten, then the very next thing to do would be to get some glue. One is recommended to use super glue for this kind of project because super glue is very efficient and dries fast. However, if one does not have super glue in his house, then he may use some other sticky glue that is waterproof.
So after getting the old insoles, one has to now do a bit of measurements. Always do make sure that all insoles have the same size so that it will be easier to place them on each other. So when one puts one insole on top of the other, he has to find the part that holds the arch of the foot.
After determining the part that would hold the arch, then he now has to cut that part with the sharp scissors. Now he has to make sure that the part that was cut out is really able to fit the insole that is whole otherwise one would have to cut it a little bit more. Once he has already done that, then the next part would be to now glue that small part to the whole insole.
After that, one may now leave the glue to dry before he tries to put it into his shoe and start walking. If he wants the glue to dry extremely fast, then he may use an electric fan to be able to help him. For fast drying purposes, one is recommended to use super fast drying glue that really sticks.
In the event that the arch support is still not high enough for the person making it, then he may actually put another insole if he would want. He just has to get the third insole and just do the entire process again. Once he has done that, then he just has to wait for the glue dry and then try it on again.
Now making handmade orthotics at home as quite easy as one will be able to see. However, do not try to do this if the flat feet case is quite severe. These handmade ones should only be used for those whose cases are not severe as the severe cases would already need the custom made ones with specific measurements.
About the Author:
For a summary of the advantages of handmade orthotics don't hesitate to check out our website today. To reach our homepage now, just click on this link http://www.customorthoticfootbeds.com.
0 comments:
Post a Comment